RX-8 kitThe RX-8 upgrade ignition kit refers to all RX-8 models. This kit will replace the existing ignition coils with Capacitive Discharge Multiple Spark Coils.

The RX-8 upgrade ignition kit refers to all RX-8 models. This kit will replace the existing ignition coils with Capacitive Discharge Multiple Spark Coils. To optimize the performance all parts have been carefully selected by our team. Curved heat resistant boots, thick spark plug wire, high power ignition coils and durable harness are the parts. The kit is accompanied with special harness for the coil connection. This way you will not cut any wire from the factory harness. The kit will give to your engine smoother start more power and less misfires.

Installation Steps
Remove the old ignition coils.
Choose the place that you will install the coils and install them (the mounting kit for the coils is not included).
Connect the coil connector harness to the old connectors and the coils.
Measure the length of each spark plug wire and cut the cable.
Install the boots on the wires.
Plug in the spark plug wires to the coil.
Note:Some of these steps have to be done by an expert.

Coil Tech Specs
Turns ratio 52:1
Primary resistance . 57 OHMs
Secondary resistance 3.1K OHMs
Inductance 5.8 mH
Maximum voltage 44,000 Volts
Peak current 150 mA
Spark duration 1200 uS
Weight 1000g
Dwell Time 4.5ms Current Draw: 8A