INTERCOOLERS

CTS Turbo is proud to announce our BMW F90 M5/M5C & F91/F92/F93 M8/M8C High Performance Intercoolers.The high density core transfers more heat than the factory intercoolers providing reduced heat soak, allowing you to drive harder for longer. Also, there is less pressure drop compared to OEM. ..

The CTS MK5 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are increased b..

This is the CTS Turbo Direct-Fit intercooler upgrade for MQB 1.8T/2.0T vehicles (2015+) with updated BLACK finish.It is important to upgrade your intercooler to keep the AIT low and your car running at it's best. Heatsoak from stock or inferior intercoolers will rob you of performance and could ..

CTS Turbo is proud to release our charge air cooler upgrade for the 2021+ BMW G8X M2/M3/M4 (S58 engine) vehicles. We all know that cooler denser charge air is a huge contributor to cleaner ignition, less timing pull and thus, more power.Now, you can improve the charge air cooling efficiency of you..

The CTS Turbo FMIC Kit for the MK1 Audi TT225Q is an excellent upgrade for any stock or modified cars. This kit provides significant cooling improvement compared to the competition, and substantial cooling benefits over the factory setup.  Improvements can be attributed to the high density intercool..

The CTS Turbo TT180 FMIC kit for MK1 TT's with FWD and Quattro drivetrain is an excellent upgrade for any stock or modified cars. This kit provides significant cooling improvement compared to the competition, and substantial cooling benefits over the factory setup.  Improvements can be attributed to..

The CTS MK6 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are increased b..

Enhance the cooling efficiency of your MK6 EA113/EA888.1 Golf R/GTI with our FMIC Kit, designed for substantial thermal improvements. The key advancements lie in the increased core volume and optimized intercooler placement, effectively mitigating heat soak and lowering charged air temperatures...

CTS Turbo is proud to announce our High-Performance Heat Exchanger for the Mercedes Benz C63/C63S AMG.The All-Aluminum High-Performance Heat Exchanger is larger and offers more efficient water cooling compared to the OEM plastic/aluminum unit. This efficiency contributes to delivering cooler and d..

We’re thrilled to introduce our latest intercooler designed specifically for the 3.0-liter V6 biturbo engine (M276 DE 30 AL), engineered to elevate cooling performance for increased power output.Our intercooler features an innovative core design, measuring 222 mm x 297 mm x 95 mm, providing a rema..

CTS Turbo is excited to introduce our upgraded Aluminum heat exchanger specifically designed for the B9 Audi RS5. We understand that the factory heat exchanger falls short in effectively cooling tuned engines, which is why we developed our own solution.Our heat exchanger boasts a significantly lar..

The CTS Turbo Direct Fit FMIC Kit for EA113 and EA888.1  2.0T engines is designed as a drop-in replacement for the OEM front-mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however,..

We are proud to announce our new intercooler designed specifically for C7/C7.5 Audi A8, S6, S7, S8, RS6, and RS7 models equipped with the powerful 4.0T engine. This intercooler is a game-changer, providing an array of performance-enhancing features that set it apart from the stock OEM core.Enhan..

CTS C7 Audi A6/A7 3.0T and S6/S7 Air-to-Water Heat Exchanger (Intercooler) Upgrade Avoid heat soak by replacing the small factory cooler; this is a must for any modified V8 4.0T C7 Audi S6/S7. Keep your air temperature low with our premium heat exchanger upgrade kit.Strongly recommended to be used..

CTS Turbo is proud to announce the BMW F10 M5/M5C & F06/F12/F13 M6/M6C High Performance Intercoolers.The high density core transfers more heat than the factory intercoolers providing reduced heat soak, allowing you to drive harder for longer. Also, there is less pressure drop compared to OEM.28%..

CTS Turbo is pleased to off our Billet FMIC connector.  This connector is machined from T6061 Aluminium and is designed to bolt into your cars turbo outlet pipe.  This part is included in our FMIC kits and is sometimes used in custom applications when wanting to connet a silicon slip fit connection ..

CTS Turbo is proud to announce our Direct fit FMIC for the B9/B9.5 platform.The OEM B9 intercoolers deliver underwhelming performance, this platform benefits greatly from an intercooler upgrade. Vehicles at stock boost levels up through Stage 1-2 and Big Turbo applications will all see a large imp..

The new CTS Turbo B8/B8.5 A4/A5-AllRoad FMIC kit  will enhance the performance and power of your vehicle substantially by maintaining lower charged air temperatures even under the most extreme abuse.  Boasting a high density bar and plate intercooler core (rated for 600HP) the CTS FMIC kit is ideal ..

CTS Turbo is proud to announce our Direct fit FMIC for the B8/B8.5 A4/A5 1.8T/2.0T platform. Now in our updated black finish!The OEM B8 and B8.5 intercoolers deliver underwhelming performance, this platform benefits greatly from an intercooler upgrade. Vehicles at stock boost levels up through Sta..

CTS Turbo is proud to announce our RACE fit FMIC for the 8V/8Y RS3 2.5T EVO with updated BLACK finish.The OEM intercooler delivers underwhelming performance, this platform benefits greatly from an intercooler upgrade. Vehicles at stock boost levels, and especially on tuned cars will all see a larg..

The CTS Turbo 600 Intercooler uses a high density core and utilizes cast aluminum end tanks. Each core is pressure tested to ensure you get only the best. This intercooler is rated for 600 crank HP. Core measurements are 20"x11.25"x3". End tank to end tank measures 28.5"...

CTS Turbo is pleased to announce the release of our Front Mount Intercooler for the MK2 Audi TT-RS.  The CTS Turbo FMIC Kit for the Audi TT-RS is an excellent upgrade for any stock or modified car.  Increasing the dimensions of the intercooler core has resulted in significant cooling improvements, i..

CTS Turbo is pleased to announce the release of our Front Mount Intercooler for the 8P RS3.  The CTS Turbo FMIC Kit for the Audi 8P RS3 is an excellent upgrade for any stock or modified car.  Increasing the dimensions of the intercooler core has resulted in significant cooling improvements, includin..

The CTS MK6 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are increased b..

The CTS MK2 TT/TTS 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are incr..

The CTS Turbo FMIC750HP Intercooler uses cast aluminum end tanks and a high density pressure tested core measuring 25.5x9.5x3.5". End tank to end tank measures 35".  This same intercooler is used on the CTS Turbo 2.0T TFSI Race FMIC kit and is rated at 750 crank HP...

The CTS Turbo FMIC450HP Intercooler. Used in the CTS Turbo 1.8T FMIC kit this intercooler uses cast aluminum end tanks and a high density pressure tested core.  This intercooler is rated at 450 crank HP and measures 25.25"x8"x2.75". End tank to end tank is 35.5"...

The CTS A3 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are increased by..

CTS Turbo is proud to announce our new A90/A91 B58 Toyota Supra Billet Heat Exchanger Cap.Our cap is made from 6061-T6 Billet aluminum and black anodized for a sleek appearance and corrosion resistance.No tools required. Simply slide it on until you here a solid click. That's it!*Remove from v..

The F150 EcoBoost intercooler + BOV upgrade from Turbosmart is a direct bolt on upgrade for the factory intercooler and blow off valve. The Turbosmart EcoBoost F150 intercooler offers massive increases in surface area and thermal mass, designed to increase mass-air flow even on standard and mildly m..

The F150 EcoBoost intercooler + BOV upgrade from Turbosmart is a direct bolt on upgrade for the factory intercooler and blow off valve. The Turbosmart EcoBoost F150 intercooler offers massive increases in surface area and thermal mass, designed to increase mass-air flow even on standard and mildly m..

The F150 EcoBoost intercooler + BOV upgrade from Turbosmart is a direct bolt on upgrade for the factory intercooler and blow off valve. The Turbosmart EcoBoost F150 intercooler offers massive increases in surface area and thermal mass, designed to increase mass-air flow even on standard and mildly m..

The F150 EcoBoost intercooler + BOV upgrade from Turbosmart is a direct bolt on upgrade for the factory intercooler and blow off valve. The Turbosmart EcoBoost F150 intercooler offers massive increases in surface area and thermal mass, designed to increase mass-air flow even on standard and mildly m..