OIL ADAPTERS

Remote oil filter block for Mazda 12A, 13B & 20B engines manufactured by Franklin Performance for plumbing a remote oil filter to your engine, making filter changes easier or where space is limited in the engine bay. The remote filter block bolts directly to the rear iron, replacing the factory ..

Oil filter stud manufactured by Franklin Engineering for fitting an oil filter directly to a Nissan RB engine, slowing you to remove the oil filter & cooler manifold found on RB20, RB25 & RB26 Engines.This is commonly done when space is limited in an engine bay, or one of our remote filter o..

Perfect for use with Aeroflow oil coolers, this billet aluminium sandwich and thermostat combines the engine oil filter and oil thermostat in one convenient unit. This is great for those wanting to remove extra lines and fittings required to run the thermostat in a separate location.The built-in the..

Move your oil filter to new location with Aeroflow Performance universal Billet Remote Oil Filter head. This is great for mounting an engine oil filter away from your engine, to make oil filter changes easier or where space is limited in the engine bay. Two labelled inlet and outlet -12 ORB ports ar..

On 1JZ/2JZ engines the stock oil cooler and pedestal take up precious room. This stainless-steel stud eliminates the stock oil cooler and pedestal assembly allowing you to screw on your OEM Toyota oil filter straight to the engine block. This stud incorporates a 24mm hex nut machined into the stud w..

Perfect for use with Aeroflow oil coolers, this billet aluminium dual port remote filter head and thermostat combines the engine oil filter and oil thermostat in one convenient unit. This is great for those wanting to remove extra lines and fittings required to run the thermostat in a separate locat..

Material: Aluminum alloySurface: AnodizedInterface Data: Two 1/8" NPT ports, two AN10 fittingsNote: The intake manifold needs to be sanded, otherwise it cannot be installed.For BMW 3 Series E46 328i/Ci 1999-2005For BMW 3 Series E46 330i/Ci/Xi 1999-2005For BMW 5 Series E39 525i 528i 530i M52/ M54 Eng..

EA888 GEN3 Engine Oil Temp & Oil Pressure Gauge Adapter..

Length: 76mm Width: 75mm Height: 32mm O-Ring Size: 65mm Sensor Hole Size: NPT 1/8 Material And Technology: 7075 forged aluminum alloy material, CNC production surface anodized treatment prevent leakage precise installation position Suitable For Vehicle Type: S..

Application:For BMW F30  N20For BMW F31 N20 Description:This adapter kit is applicable for BMW N20 engine, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup.This is an ideal upgrade for drivers seeking additional cooling for track environments or for those ..

The iABED Industries 07K Oil Cooler kit is designed to aid with the notorious oil cooling issues that plague the 07K line of engines. The OEM Heat Exchnager is inadequate in maintaining oil temperatures below 240*F (115 *C) .Common consensus is tracking vehicles in extreme heat causes oil temperatur..

Oil Filter Adapter Thermostat 73±0.5° For M20*1.5 & 3/4-16 UNF and 1/8NPT Aluminum Black..

LR Oil Filter Adapter Fit For BMW Mini Cooper S Supercharger R50 R52 R53 02-06 Black..

LR Oil Filter Adapter AN10 Fit For BMW Mini Cooper S Supercharger R56 1.6L 06-12 BK..

Inlet/Outlet M18 x 1.5..

Specification:100% quality assurance tested, more responsive, less expensive, easier to install.Improved Racing's remote oil filter mount features a built-in thermostat to save both space and cost.Intended for use with an oil cooler, the internal thermostat ensures engine oil reaches safe operating ..

The Ross Performance Parts Nissan RB Twin Cam Head Drain Adaptor is designed to help prevent potentially dangerous amounts of oil from pooling in the back of the head.Excessive top end oiling is an inherent design problem with the RB platform when the factory oil pump is upgraded or on engines tha..

Specification:Oil Filter Relocation for Easier Access A Must to Hard to Reach Oil FilterFitment: 3/4" X16UNF or M20x1.5 ThreadFittings: 10-AN..

* Fabricated from high tenstile aluminium* Super Light Weight* Anodized in gold color.* ♯10 size oil inlet and outlet* Can use the OEM oil pressure sensor connector PT1/8* Can use the OEM oil temperature sensor connector PT1/8..

Specification:Oil Filter Relocation for Easier Access A Must to Hard to Reach Oil FilterFitment: 3/4" X16UNF or M20x1.5 ThreadFittings: 10-AN..

Dimensions& Material:Overall dimension : 3.06" (diameter) x 1.28" (thickness).Inlet diameter : 10AN / Outlet diameter : 10AN.Bypass port mounting nut dimension : 3/4-16 UNF // M20 x 1.5.Thread size of sensor insertions : 1/8 NPT.Color:Black..

RB OIL COOLER ADAPTER..