ΠΕΤΑΛΟΥΔΕΣ ΓΚΑΖΙΟΥ

LS 9 Throtthe Body 92mm..

The Bosch Motorsport drive-by-wire (DBW) electronicthrottle bodies are designed to control the fresh air delivery into the engine electronically replacing the mechanical linkage from the accelerator pedal. This DBW setup will require three things to make it work: I. An accelerator pedal module (Sold..

Due to Larger Diameter.You Must Use A Pro Series Intake Manifold or Make Adjustments to Intake Manifold Throttle Body Flange to Match Bore and Keep IAC (Idle Air Control) Passage SeparateComplement your Series Throttle Body with a Pro Series Intake Manifold for increased airflowWill not fit on some ..

HEMI 80mm Throttle Body (IE manifold)..

This adapter flange allows you to adapt a Bosch Drive By Wire 68mm 4-bolt throttle bodyto a Nissan SR20 standard intake manifold. This is a great upgrade for the older cable driven throttle body. Suits Bosch 68mm DBW AF64-2147or Bosch 0 280 750 156...

Throttle Position Sensor Motorsport Contactless 8mm TPS..

 90mm to bosch 82mm throttle body adapter..

Throttle Body Adapter 90mm to 82mm Bosch..

Magnus Remote IAC (Idle Air Control) Motor Adaptor. for Mitsubishi EVO. You upgraded your throttle body, to a BIG bad 90mm but you have no idle. Or you’ve been rocking a mustang throttle body on your car for the last few years but you are sick of keeping the car alive on cold start? This part allows..

APPLICATIONS:Supreme quality Throttle Body For Honda K20For high flow applications, max your airflow for ultimate performanceApprox airflow performance increase is at 20 percent.This throttle body has a 70mm opening..

LS2/3/7 Throttle connector..

K20 Idle Sensor..

These handy adapters bolt to front of the popular Bosch 74mm and 82mm Electronic Throttle Body (AF64-2135, AF64-2136) and allows an Aeroflow intercooler clamp (AF25-3000 and AF25-3500 sold separately) to be used. The internal bore of the adapter has been designed to ensure a smooth transition to the..

Subaru TGV Delete Kit 07+..

Manifold Adapter Plate for 92mm Throttle Body For Gen III LS1 LS2 LS6 Lsx LS4 ..

6 pin Bosch throttle plug..

DESCRIPTIONCTS Turbo is now offering throttle body spacers for the EA113 FSI and EA888.1 TSI engines. These spacers offer a injection point for water/meth systems as well as increase in plenum volume.This increase will aid in boosting the mid-range torque of the vehicle.Included in the kit is the sp..

DESCRIPTIONCTS Turbo is now offering throttle body spacers for the 1.8T engine. These spacers offer a injection point for water/meth systems as well as increasing the plenum volume. This increase will aid in boosting the midrange torque of the vehicle. Included in the kit is the spacer, 2 OEM gasket..

DescriptionThese raw alloy weld on flanges are designed to suit the Bosch 74mm Electronic Throttle Body (AF64-2135) and Bosch 82mm Electronic Throttle Body (AF64-2136). Perfect to weld onto your intake manifold to run the Bosch DBW using a O-Ring seal...

Descriptionhese raw alloy weld on flanges are designed to suit the Bosch 74mm Electronic Throttle Body (AF64-2135) and Bosch 82mm Electronic Throttle Body (AF64-2136). Perfect to weld onto your intake manifold to run the Bosch DBW using a O-Ring seal...