ELECTRONICS

Smaller, lighter and water-proof! The new Haltech Wideband Controller can now be safely fitted inside your engine bay but that's not all...Suits: Bosch LSU 4.9 SensorIncludes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, 2 x Weld-on Bung, Quick..

Nexus R5 is Haltech's flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit).4 x 25A (continuous) push-pull PWM capable ..

Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts.Featuring a robust environmentally sealed water-r..

Elite 2000/2500 Universal I6 Cylinder IGN-1A Ign Harn onlySuits: Custom installations or Haltech Toyota 2JZ terminated engine harnesses.Includes: Terminated ignition harness.Notes: Engine harness and IGN-1A ignition coils are NOT included. Please order 6 x HT-020114 if required...

Includes: Triple panel and yellow and red adjustment knobs.Notes: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if required...

Includes: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules...

As supplied this product is direct Plug 'n' Play compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU Harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB.Suits: Elite and NEXUS Series ECUs onlyIncludes: Eight Channel Thermocouple Amplifier, CAN cable, D..

This product emulates Haltech TCA-4 Box A and TCA-4 Box B. This unit will display in ESP online or ECU Manager as a TCA-4 Box A and a TCA-4 Box B.As supplied this product is direct Plug 'n' Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or multiple CAN device installatio..

Quick and easy installation of the Haltech iC-7 dash into a Non-EFI VehicleSuits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor PackIncludes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable TiesNotes: Use with HT-010001 - iC-7 Sensor Pack..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution. You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dir..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution.You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!Dire..

iC-7/uC-10 Dash Tube Mount 31.75mm (1.25")Suits: iC-7/uC-10 Mounting Brackets (HT-060070 and HT-060071)Includes: 1 x Annodized Dash Tube Mount 2 x Zinc M8 x 10 Bracket Mounting Screws 4 x Zinc M6 x 25 Assembly Screws..

2.5mm Black Annodized Aluminium Bracket for iC-7 and uC-10 Digital Dashes.Suits: Haltech iC-7 and uC-10 Display DashesIncludes: 1 x 2.5mm Black Annodized Aluminium Bracket..

Includes: 1 x HT-010304 Coolant Temp Sensor - 1/8 NPT Thread 1 x HT-120000 Adaptor - Brass 1/8"NPTF to 3/8"NPT 2 x HT-010904 150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensors..

Suits: Haltech iC-7 Display DashIncludes: 1 x iC-7 Moulded Panel Mount- BlackNotes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic..

With a crisp, clear and full-color display, the all-new Haltech uC-10 Display Dash is now available.The uC-10 is compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. It can also be wired in as a complete stand-alone unit. This versatility ensures that it can seamlessly integrate i..

With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way.Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package.Featuring auto-dimming amb..

With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way.Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package.Featuring auto-dimming amb..

With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way.Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package.Featuring auto-dimming amb..

Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 / uC-10 Dash to display the data obtained from the vehicles OBD II system in real time.Suits: Haltech iC-7 / uC-10 DashIncludes: Cable and Fuse..

Haltech's new Multi-function CAN Gauge displays real-time data from your Haltech ECU.Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy to use app on your smartphone..

Outputs: 0V to 12V Pulsed OutputSuits: Apllications that require a digital speed signalIncludes: Includes: GPS Speed Input Module & GPS Antenna Matching male DTM-3 Connector and pinsNotes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU Inputs, GPS update Rate 10Hz, High Accur..

Suits: Elite Pro Plug-in ECU's IC-7 Display Dash uC-10 Display DashIncludes: Terminated Harness 1 x AMP 34 Pin 4 Row 4 Keyway 1 x DTM 4 Can Connector 15 x Spare Pins to suit AMP Connector 30 x Sealing PlugsNotes: Harness Is included in ELite Pro Plugins and IC-7 / uC-10 Display Dash. Purchase if rep..

Pre-terminated harness for inline 6 engine configuration.Plug and Play with Haltech Elite Toyota 2JZ terminated engine harness, or use included DT-8 opposing connector to wire to an alternate harness (e.g. universal application).Suits: Hitachi "R35 GTR" Ignition Coils Haltech 2JZ Terminated Harness ..

Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end an..

If you are using a factory harness and are after an easy ECU upgrade - this is a product for you. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.A simple Haltech Plug'n'Play product that allows yo..