Includes: Matching plug and pins, -4 AN & 5mm hosetail adaptors.Notes: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103..
Includes: Matching Delphi plug and 3 pins.Notes: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103..
Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors.Notes: "TI" MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103..
The IE 5 Bar Map Sensor Kit is designed to replace the factory 3 bar MAP (manifold absolute pressure) and PUT (pressure up throttle) sensors found on the VW & Audi MK7/8V GTI, Golf R, GLI, A3, and S3 EA888 Gen 3 engines. Upgrading to the 5-bar MAP Sensor Kit increases the ECU's ability to read h..
Aeroflow Performance / Bosch Motorsport combined liquid pressure and temperature sensor is the one and only sensor you need for your race car. It features 2 sensors in one small compact unit. The liquid pressure reads 0-150 psi (0 to 10 bar) and the temperature rating is -40 to 140°C (-40 to 284°F)...
Aeroflow Performance combined liquid pressure and temperature sensor is the one and only sensor you need for your race car. It features 2 sensors in one small compact unit. The liquid pressure reads 0-150 psi (0 to 10 bar) and the temperature rating is -40 to 140°C (-40 to 284°F). Using stainless st..
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For most applications, For very high boost applications, the 4 BAR adapter can be used which requires Bosch 4 BAR sensor part 281002576...
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For most applications, For very high boost applications, the 4 BAR adapter can be used which requires Bosch 4 BAR sensor part 281002576...
This can be used for either a Premium Series Oil Pressure or Premium Series Fuel Pressure gauge0-5 VOLT0-150 PSI1/8"NPT thread
PSSMOPS
Linear Scale
BAR
0
2
5
8
10
PSI
0
29
72.5
116
145
V
0.5
1.3
2.5
3.7
4.5..
PLM Private Label Mfg. 4 BAR MAP sensors for the Honda K-Series are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably support up to 43 psi of boost pressure.Engine Applications:Honda K-Series (Except K24Z-Series)Subaru BRZScion FR-SToyota ..
PLM Private Label Mfg. 4 BAR MAP sensors for the Honda B / D / H / F-Series are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably support up to 43 psi of boost pressure.Fitment Applications:88-00 Civic/CRX90-01 Integra93-97 Del-Sol92-01 Pr..
Designed to be used with all Prosport Electric Boost gauges. Be sure to use an in-line filter(supplied with all of our boost gauges) to extend the life and accuarcy.
PSEBOS
Linear Scale
BAR
-1
0
1
2
3
PSI
-14.5
0
14.5
29
43.51
..
This can be used with a Premium Series 60psi Boost Pressure gauge0-5 VOLT0-60 PSI1/8"NPT threadNote: This sender cannot be used with Performance series gauges...