Modifying your Audi 2.5TSFI engine for more power, want to get rid of the problematic PCV set up which is hard to modify, and pulls oil from the crank into the combustion chamber via ports on the cylinder head? Using this plate will close off the factory PCV ports, and allow you to run an external P..
Application:For BMW F30 N20For BMW F31 N20 Description:This adapter kit is applicable for BMW N20 engine, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup.This is an ideal upgrade for drivers seeking additional cooling for track environments or for those ..
The iABED Industries 07K Oil Cooler kit is designed to aid with the notorious oil cooling issues that plague the 07K line of engines. The OEM Heat Exchnager is inadequate in maintaining oil temperatures below 240*F (115 *C) .Common consensus is tracking vehicles in extreme heat causes oil temperatur..
For 2013-2019 Subaru BRZFor 2013-2015 Scion FR-SFor 2013-2019 Toyota GT86 FT86 Engine: FA20Made with super light weight high quality 6061 AluminumThe oil filter sandwich plate features a built in Thermostat,this keeps the oil cooler from circulating oil until the car is warm then the valve will..
The OEM plastic Positive Crankcase Ventilation (PCV) valve does not hold pressure well, even when brand new. This means that when you are in boost conditions, the highly pressurized PCV valve leaks charged air back into the crankcase. Depending on the condition of your PCV valve, this can range from..
Installing a custom catch can system now made easier with our ECS Billet PCV Adapter Plate. Features:Machined from 6061-T6 Billet AluminumAnodized blackIncorporates a -10AN ORB (O-Ring Boss) Fitting for leak free plumbingIncorporates factory style, billet PCV port for precise OE fitment Ma..
Specification:100% quality assurance tested, more responsive, less expensive, easier to install.Improved Racing's remote oil filter mount features a built-in thermostat to save both space and cost.Intended for use with an oil cooler, the internal thermostat ensures engine oil reaches safe operating ..
The Ross Performance Parts Oil Return Adaptor Kit; including our Billet Oil Return Block and fittings for either a Dry Sump Conversion or Remote Oil Filter set up. Suits both Toyota 1JZ and 2JZ engines...
The Ross Performance Parts Oil Return Adaptor is a direct replacement for the OEM oil filter block to allow plumbing of upgraded and improved oiling systems, whether it’s a Dry Sump system, External Oil Pump, Remote Oil Filter, Oil Cooler, or a combination.Easy to install and featuring aftermarke..
The Ross Performance Parts Oil Return Adaptor Kit; including our Billet Oil Return Block and fittings for either a Dry Sump Conversion or Remote Oil Filter set up. The latest design includes ports for the attachment of both the OEM oil pressure sensor and the OEM oil temp sensor, as well as an after..
A Ross Performance Parts Nissan RB Oil Cooler Block Off Plate will simplify your RB cooling system and save weight. Remove that chunky oil to water Heat Exchanger and keep your OEM Oil filter mount, oil temp sensor and oil pressure sensor, all with this simple screw in part...
The Ross Performance Parts Nissan RB Twin Cam Head Drain Adaptor is designed to help prevent potentially dangerous amounts of oil from pooling in the back of the head.Excessive top end oiling is an inherent design problem with the RB platform when the factory oil pump is upgraded or on engines tha..
Billet Cam Covers to suit Wet or Dry Sump application on all twin-cam Nissan RB engines.Ross Performance Parts Billet Cam Covers are a fully sealed, low profile, lightweight solution, featuring -8 ORB breather ports...
The Mosselman Oil Line Adapter is part of the Oil Cooler Kit (Single/Twin), but can also be bought separately to give more flexibility in routing oil cooler lines for aftermarket performance parts.The adapter is made out of lightweight anodized aluminum. Size: ANFit To:BMW 3351 GT F34 306HP (BEFORE ..
The Mosselman Oil Line Adapter is part of the Oil Cooler Kit (Single/Twin), but can also be bought separately to give more flexibility in routing oil cooler lines for aftermarket performance parts.The adapter is made out of lightweight anodized aluminum. Size: ANFit To:BMW 3351 GT F34 306HP (BEFORE ..
JZ Block Oil Adapter Pipe 3/4"-16. We often get requests to sell the
adapter pipe from our JZ oil cooler kits by itself, so now we do! These
pipes are US made on a CNC lathe using DOM steel for extreme strength
and accuracy. The shorter length pipe is for the JZ block when removing
the stock oil..
When installing a girdle kit or simply converting your 2.0T FSI (belt driven) engine to use the 06A oil pump, it is required to use the 06A oil filter housing. This is because the FSI engines have the oil check valves built in to the factory oil pump/balance shaft assembly , whereas the 06A pump doe..