The Aeroflow Performance digital boost controller is a must have to take control of the boost level in your turbocharged car. It features three stages of boost pressure to create your own personal settings, save them and rapid switching between each setting allows you to switch between them on the f..
These handy adapters bolt to front of the popular Bosch 74mm and 82mm Electronic Throttle Body (AF64-2135, AF64-2136) and allows an Aeroflow intercooler clamp (AF25-3000 and AF25-3500 sold separately) to be used. The internal bore of the adapter has been designed to ensure a smooth transition to the..
The Aeroflow Performance 4 port 2000hp efi fuel regulator is designed to provide a stable platform for the high demands of all current fuel systems. With fuels such as E85, Methanol and alcohol based fuels this fuel regulator is an ideal upgrade to maintain a steady flow rate with 4 x -8ORB feed por..
These Aeroflow Performance universal bulkhead turbo drains are a convenient must have fitting for DIY enthusiast. When turbocharging a N/A engine there isn't much option for a turbo drain back into oil pan. This screw together bulkhead fitting allows for easy installation with no weld..
Turbo Oil Drain Adapter With O-Ring Seal.-10 AN with Male 45 degree swivel and 50.8mm hole centres to suit turbos with 50.8mm bolt centres on core. This selection of turbo drains options available from Aeroflow Performance will allow a large range custom plumbing application. For suff..
Turbo Oil Drain Adapter With O-Ring Seal.-16mm Barb 4" (100mm) long tube with 38-44mm hole centres to suit turbos with 38mm bolt centres on core. This selection of turbo drains options available from Aeroflow Performance will allow a large range custom plumbing application. For suffic..
Turbo Oil Drain Adapter With O-Ring Seal.-16mm Barb 4" (100mm) long tube with 38-44mm hole centres to suit turbos with 38mm bolt centres on core. This selection of turbo drains options available from Aeroflow Performance will allow a large range custom plumbing application. For suffic..
This 20-degree turbo drain option available from Aeroflow Performance is designed for turbochargers with minimal clearance between both the front compressor cover and turbine rear housing. Will suit all turbochargers with a 50.8mm bolt center...
Aeroflow's universal flexible turbo drains are designed to help you quickly and eaisly plumb up your turbo drain. Featuring -10 female swivel nuts at both ends they are easily mated to our turbo drains and block and sump fittings. Made from 304 stainless steel to protect them from tur..
Aeroflow's universal flexible turbo drains are designed to help you quickly and eaisly plumb up your turbo drain. Featuring -10 female swivel nuts at both ends they are easily mated to our turbo drains and block and sump fittings. Made from 304 stainless steel to protect them from tur..