FUELTECH

Supply Voltage: 12-24Vdc Standby Current: <50mACommunication BUS: FTCAN 2.0CAN connector: 1 Molex male, 1 Molex female              Switch Life: million operationsMaterial: Silicone rubber with polyurethane HardcoatMounting Studs: #10-32 (3/16”x32)Ingr..

Designed to use with FuelTech FT550/FT600 on board conditioner, to perform powershifts.Detects knob deformation to perform ignition cut/timing retardH-pattern, sequential or inline applicationCNC machined*Power shift functions: only compatible with dog engagement gearboxes (Liberty Pro-Shift, Libert..

The WB-O2 Nano O2 Conditioner features an extended reading scale down to 0.35 λ*, compact size, and CAN communication with our Power FT line of ECUs, preserving your ECU’s inputs for other sensors. Sending O2 data to your ECU’s datalogger via CAN bus network, instead of traditional analog inputs, is..

Compatible with WB-O2 Nano and the new NanoPRO.For use with the Bosch LSU4.2 O2 sensor.Length:1m (3ft)..

Unterminated harness for FT550:A & B Harnesses - Both of these harnesses are required.B Harness - Ordered by itself only if upgrading from FT450...

FuelTech's FT550 is more than an ECU offering electronic fuel injection, integrated dashboard, data acquisition, and power management. The FT550 is designed for engines with up to 12 cylinders, or up to 4 rotors, and features 14 programmable inputs and 24 outputs. In addition to offering all of the ..

Unterminated harness for FT450/550 A connector...

FuelTech's FT450 is the perfect ECU for projects with limited input and output channel needs, offering 7 configurable inputs and 10 outputs. This cost-effective aftermarket ECU is equipped with the same FTManager software and many of the same features offered in the FT550, FT550LITE, and FT600 inclu..